Hydraulic Pilot Operated Cartridge Check Valves

Hydraulic Pilot Operated Cartridge Check Valves serie operates by a stainless steel ball, the steel ball is exactly on a valve seat to close the inlet port, this design is for hydraulic systems require fast check response. Pilot Operated Cartridge Check Valves are check valves for oil hydraulic systems, on which the shut-off function can be cancelled hydraulically. Due to the seat valve construction, the valve is leakage-free in the shut-off position.
Hydraulic Pilot Operated Cartridge Check Valves are check valves that use a hardened steel ball to seal against the valve seat as opposed to a poppet. 2-Way Cartridge Vheck Valve are simple in their design and provide low leakage over the life of the system.

Pilot Operated Cartridge Check Valves

2-Way Pilot Operated Cartridge Check Valves are simple in their design and provide low leakage over the life of the system. Check Cartridge Valves with Hardened seat for long life and low leakage. All Hydraulic Performance valves are tested at a verification level of 90% and an assurance of 99%. Pilot Operated Cartridge Check Valves are non-modulating, on-off devices used for holding a load or actuator in position.  Pilot Operated Cartridge Check Valves can be directly integrated into your actuator or applied using manifolds with many mounting options.

Pilot Operated Cartridge Check Valves

Pilot Operated Cartridge Check Valves are check valves that use a hardened steel ball to seal against the valve seat as opposed to a poppet. 2-Way Cartridge Vheck Valves are simple in their design and provide low leakage over the life of the system.
Operating Pressure ：250 Bar
Internal Leakage :2 drops/min. max. at 250 Bar Crack Pressures：
2.1=2.1Bar
3.4=3.4Bar
6.2=6.2Bar
Pilot Ratio: 3  ： 1
Temperature：-22°F to +250°F (-30°C to +120°C)
Recommended Filtration: Critical Application - ISO 16/12
Non-Critical Application - ISO 19/15
Fluids：Mineral-based fluids. For other fluid compatibility, consult factory.
Cavity :10-3
Body Material：Anodized 6061T6 aluminum
alloy rated at 207 Bar.

Hydraulic Pilot Operated Cartridge Check Valves

The Hydraulic Pilot Operated Cartridge Check Valves are installed to protect the hydraulic components in high pressure system, usually install in front of the pump and on the system return line. Cartridge check valve series operates by a stainless steel ball, the steel ball is exactly on a valve seat to close the inlet port, this design is for hydraulic systems require fast check response. Cartridge check valves can be incorporated into virtually any mounting design. They are easily inserted into fittings, manifolds, or installed in-line.
Operating Pressure ：210Bar
Internal Leakage ：0〜2 drops/min.
Coil Rating ：Continuous from 90% to 110% of rated voltage.
Recommended Filtration : Critical Application-ISO 16/12 Non-Critical Application-ISO 19/15
Fluids ： Mineral-based fluids. For other fluid compatibility consult factory.
Cavity  ： 08-2
Body Material : Anodized 6061T6 aluminum alloy rated at 207 Bar.

Hydraulic Pilot Operated Cartridge Check Valves

Hydraulic Pilot Operated Cartridge Check Valves fit into industry standard cavities and may be supplied for installation in manifolds, or be provided in standard housings having SAE or BSPP ports suitable for in-line mounting. A wide selection of cracking pressures is available from 0,21 to 20,7 bar (3 to 300 psi). Thus the opportunity exists to use the valves not only as conventional check but also as low pressure relief valves. alloy rated at 207 Bar.
Hydraulic Pilot Operated Cartridge Check Valves FEATURES
Hardened poppet and seat for long life. I
ndustry common cavity.
Compact size.
 Temperature：-22°F to +250°F (-30°C to +120°C)
 Recommended Filtration: Critical Application - ISO 16/12
 Non-Critical Application - ISO 19/15
 Fluids：Mineral-based fluids. For other fluid compatibility, consult factory.
 Cavity :10-3
 Body Material：Anodized 6061T6 aluminum

 alloy rated at 207 Bar.

Cartridge Check Valves

Cartridge Check Valves are check valves that use a hardened steel ball to seal against the valve seat as opposed to a poppet.  2-Way Cartridge Vheck Valve are simple in their design and provide low leakage over the life of the system.
 Temperature：-22°F to +250°F (-30°C to +120°C)
 Recommended Filtration: Critical Application - ISO 16/12
 Non-Critical Application - ISO 19/15
 Fluids：Mineral-based fluids. For other fluid compatibility, consult factory.
 Cavity :10-3
 Body Material：Anodized 6061T6 aluminum
 alloy rated at 207 Bar.